Buick Enclave manuals

Buick Enclave: Cargo Cover. Cargo Tie-Downs. Cargo Management System

Buick Enclave 2008-2017 Owners Manual / Storage / Additional Storage Features / Cargo Cover. Cargo Tie-Downs. Cargo Management System

Cargo Cover

For vehicles with a cargo cover, it can be used to cover items in the rear of the vehicle. To install the cover, place the loops on each corner of the cover on the four hooks in the rear of the vehicle.

The cover should be stored securely when not in use.

Cargo Tie-Downs

Four cargo tie-downs are located in the rear compartment of the vehicle.

The tie-downs can be used to secure small loads.

Cargo Management System

This vehicle has a cargo management system located in the rear.

To remove the cargo management cover:

To remove the cargo management cover:

1. Open the cover. It remains open when lifted.

2. Pull the cover up making sure to unhook the hinges at the rear of the cover.

An improperly latched and closed cargo cover, or cargo cover left in the openWARNING
An improperly latched and closed cargo cover, or cargo cover left in the open position, could be thrown about the vehicle during a crash or sudden maneuver.

Someone could be injured.

Be sure to return the cover to the closed position and latch before driving. If the cover is removed, always store it outside of the vehicle. When it is replaced, always be sure that it is securely reattached.

3. Remove the cover from the vehicle and store outside of the vehicle.

READ NEXT:

 Convenience Net

For vehicles with a convenience net in the rear, use it to store small loads as far forward as possible. The net should not be used to store heavy loads.

 Roof Rack System

WARNING If something is carried on top of the vehicle that is longer or wider than the roof rack—like paneling, plywood, or a mattress—the wind can catch it while the vehicle is being driven.

SEE MORE:

 Automatic Transmission Shift Lock Control Function Check. Ignition Transmission Lock Check. Park Brake and P (Park) Mechanism Check

Automatic Transmission Shift Lock Control Function Check WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a l

 Repair Instructions - On Vehicle

TRANSFER CASE FLUID REPLACEMENT Removal Procedure 1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. 2. Remove the drain plug. Fig. 2: Identifying Drain Plug 3. Remove the fill plug. Fig. 3: Identifying Fill Plug Installation Procedure 1. Clean the drain plug. Fig. 4: Id

© 2016-2026 Copyright www.benclave.com