Buick Enclave manuals

Buick Enclave: Checking the Restraint Systems

Buick Rainier / Buick Rainier Owners Manual / Seats and Restraint Systems / Restraint System Check / Checking the Restraint Systems

Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly.

Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Keep safety belts clean and dry.

Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces.

If a belt is torn or frayed, get a new one right away.

Also look for any opened or broken airbag covers, and have them repaired or replaced. The airbag system does not need regular maintenance.

Notice: If you damage the covering for the driver’s or the right front passenger’s airbag, or the side impact airbag covering on the ceiling near the side windows, the airbag may not work properly. You may have to replace the airbag module in the steering wheel, both the airbag module and the instrument panel for the right front passenger’s airbag, or side impact airbag module and ceiling covering for roof-mounted rollover airbags (if equipped).

Do not open or break the airbag coverings.

READ NEXT:

 Replacing Restraint System Parts After a Crash

CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash.

 Features and Controls

SEE MORE:

 If a Tire Goes Flat

It is unusual for a tire to blow out while driving, especially if the tires are maintained properly. See Tires. If air goes out of a tire, it is much more likely to leak out slowly. But if there is ever a blowout, here are a few tips about what to expect and what to do: If a front tire

 Menu System

Controls The Menu knob, SELECT button, and BACK button are used to navigate the menu system. Menu Knob: Turn to: • Enter the menu system. • Highlight a menu option. • Select a value. SELECT: Press to: • Select or activate the highlighted menu option. • Confirm a set value.

© 2016-2025 Copyright www.benclave.com