Buick Enclave: Engine Cover
A. Oil Fill Cap
B. Engine Cover
To remove:
1. Remove the oil fill cap (A).
2. Raise the engine cover (B) to release it from the retainers.
3. Lift and remove the engine cover.
4. Reverse Steps 1 through 3 to reinstall engine cover.
READ NEXT:
Engine Oil
To ensure proper engine performance and long life, careful attention must be
paid to engine oil. Following these simple, but important steps will help protect
your investment:
► Always use
Engine Oil Life System
When to Change Engine Oil
This vehicle has a computer system that indicates when to change the engine oil
and filter. This is based on a combination of factors which include engine revolutions,
e
Automatic Transmission Fluid
It is not necessary to check the transmission fluid level.
► transmission fluid leak is the only reason for fluid loss. If a leak occurs, take
the vehicle to the dealer and have it repaired a
SEE MORE:
Universal Remote System Operation
Using Universal Remote
Press and hold the appropriate Universal Remote button for at least half of a
second. The indicator light will come on while the signal is being transmitted.
Erasing Universal Remote Buttons
All programmed buttons should be erased when the vehicle is sold or the lease
e
Liftgate
To open the liftgate the vehicle must be in P (Park). Press the touch pad under
the liftgate handle. To close the liftgate, use the pull cup or pull strap as an
aid.
Power Liftgate
On vehicles with a power liftgate, the vehicle must be in P (Park) to operate
it.
► Press and hold on t
© 2016-2024 Copyright www.benclave.com
