Buick Enclave: Erasing Universal Home Remote Buttons

Buick Lucerne / Buick Lucerne Owners Manual / Features and Controls / Universal Home Remote System / Erasing Universal Home Remote Buttons

The programmed buttons should be erased when the vehicle is sold or the lease ends.

To erase either Rolling Code or Fixed Code on the Universal Home Remote device:

1. Press and hold the two outside buttons at the same time for approximately 20 seconds, until the indicator lights, located directly above the buttons, begin to blink rapidly.

2. Once the indicator lights begin to blink, release both buttons. The codes from all buttons will be erased.

For help or information on the Universal Home Remote System, call the customer assistance phone number under Customer Assistance Offices.

SEE MORE:

Front Axle

When to Check Lubricant It is not necessary to regularly check front axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. How to Check Lu To get an accurate reading, the vehicle should be on a leve

Doing Your Own Service Work

WARNING You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. ► Be sure you have sufficient knowledge, experience, the proper replacement parts, and tools before attempting any vehicle maintenance task. ► Be

Buick Enclave: Erasing Universal Home Remote Buttons

READ NEXT:

Storage Areas

Glove Box

SEE MORE:

Front Axle

Doing Your Own Service Work