Buick Enclave manuals

Buick Enclave: Fuel Gauge

Metric

Metric

 

 

 

English

When the ignition is on, the fuel gauge shows about how much fuel the vehicle has left in the fuel tank.

An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on.

The gauge will first indicate empty before the vehicle is out of fuel, but the vehicle's fuel tank should be filled soon.

When the fuel tank is low on fuel, the FUEL LEVEL LOW message appears on the Driver Information Center (DIC). For more information see Fuel System Messages .

Here are some situations that can occur with the fuel gauge. None of these indicate a problem with the fuel gauge.

► At the gas station, the fuel pump shuts off before the gauge reads full.

► It takes a little more or less fuel to fill up than the fuel gauge indicated. For example, the gauge may have indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank.

► The gauge moves a little while turning a corner or speeding up.

► The gauge goes back to empty when the ignition is turned off.

READ NEXT:

 Engine Coolant Temperature Gauge

Metric English This gauge shows the engine coolant temperature. Under normal driving conditions the gauge will read 100°C (210°F) or less. If the gauge pointer is near 125°C (260°F), the

 Voltmeter Gauge

When the engine is not running, but the ignition is on, this gauge shows the battery's state of charge in DC volts. When the engine is running, this gauge shows the condition of the charging

 Safety Belt Reminders

Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument panel cluster. When the vehicle is started, this light flashes and a chime may come on to remind

SEE MORE:

 Memory Seats

On vehicles with the memory feature, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and power steering column, if available. Storing Memory Positions To save into memory: 1. Adjust the driver seat and seatback recliner, b

 Description and Operation

DISC BRAKE SYSTEM DESCRIPTION AND OPERATION System Component Description The disc brake system consists of the following components: Disc Brake Pads Applies mechanical output force from the hydraulic brake calipers to friction surfaces of brake rotors. Disc Brake Rotors Uses mechanical output force

© 2016-2020 Copyright www.benclave.com