Buick Enclave: High Voltage Devices and Wiring
WARNING
Exposure to high voltage can cause shock, burns, and even death. The high voltage
components in the vehicle can only be serviced by technicians with special training.
High voltage components are identified by labels. Do not remove, open, take apart,
or modify these components.
High voltage cable or wiring has orange covering. Do not probe, tamper with,
cut, or modify high voltage cable or wiring.
READ NEXT:
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the ci
The wiring circuits in your vehicle are protected from short circuits by a combination
of fuses, circuit breakers and fusible thermal links.
This greatly reduces the chance of fires caused by elect
The underhood fuse block is located in the engine compartment, on the passenger
side of the vehicle.
Lift the cover for access to the fuse/relay block.
Notice: Spilling liquid on any electrical
SEE MORE:
As a new owner, your vehicle is automatically enrolled in the Roadside Assistance
program.
The services are available at no cost under the terms and conditions of the program.
The Roadside Assistance program is not part of, or included, in the coverage provided
by the new vehicle limited warr
TRANSFER CASE FLUID REPLACEMENT
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the drain plug.
Fig. 2: Identifying Drain Plug
3. Remove the fill plug.
Fig. 3: Identifying Fill Plug
Installation Procedure
1. Clean the drain plug.
Fig. 4: Id
© 2016-2024 Copyright www.benclave.com