Buick Enclave manuals

Buick Enclave: Interior Lighting

Dome Lamps

The dome lamps are located in the overhead console and above the rear seat passengers.

The dome lamps come on when a door is opened, unless the dome lamp override button is pressed in.

To manually turn them on, turn the instrument panel brightness control clockwise to the farthest position.

Dome Lamp Override

The dome lamp override button is next to the exterior lamps control.

The dome lamp override button is next to the exterior lamps control.

in and the dome lamps remain off when a door is opened. DOME OFF: Press the top of the button in and the dome lamps remain off when a door is opened.

An indicator light on the button comes on to show that the dome lamps are off. Press near the bottom of the button so the dome lamps come on when a door is opened.

Reading Lamps

Press the button near each lamp to turn them on or off.

For more information, see:

► Dome Lamps .

► Instrument Panel Illumination Control .

READ NEXT:

 Exterior Lighting

The exterior lamps control is located on the instrument panel, to the left of the steering wheel. : Turns the automatic light control on or off. AUTO: Automatic operation of the headlamps at

 Windshield Wiper/Washer

The windshield wiper/washer lever is located on the left side of the steering column. Turn the band with the wiper symbol to control the windshield wipers. : Use for a single wiping cycle. : U

 Climate Controls

  A. Fan Control B. AUTO (Auto Operation) C. Defrost D. Air Recirculation E. REAR (Rear Climate Control) F. Air Delivery Mode Control G. Driver Side Temperature Control H. Display I. P

SEE MORE:

 Repair Instructions - On Vehicle

TRANSFER CASE FLUID REPLACEMENT Removal Procedure 1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. 2. Remove the drain plug. Fig. 2: Identifying Drain Plug 3. Remove the fill plug. Fig. 3: Identifying Fill Plug Installation Procedure 1. Clean the drain plug. Fig. 4: Id

 Pistons, Connecting Rods & Bearings

* PLEASE READ THIS FIRST * NOTE: Examples used in this article are general in nature and do not necessarily relate to a specific engine or system. Illustrations and procedures have been chosen to guide mechanic through engine overhaul process. Descriptions of processes of cleaning, inspection, asse

© 2016-2023 Copyright www.benclave.com