Buick Enclave manuals

Buick Enclave: Universal Remote System Operation

Buick Enclave 2008-2017 Owners Manual / Instruments and Controls / Universal Remote System / Universal Remote System Operation

Using Universal Remote

Press and hold the appropriate Universal Remote button for at least half of a second. The indicator light will come on while the signal is being transmitted.

Erasing Universal Remote Buttons

All programmed buttons should be erased when the vehicle is sold or the lease ends.

To erase all programmed buttons on the Universal Remote device:

1. Press and hold down the two outside buttons until the indicator light begins

1. Press and hold down the two outside buttons until the indicator light begins to flash, after 20 seconds.
2. Release both buttons.

Reprogramming a Single Universal Remote Button

To reprogram any of the three Universal Remote buttons, repeat the programming instructions earlier in this section, beginning with Step 2.

For help or information on the Universal Home Remote System, call the customer assistance phone number under Customer Assistance Offices (U.S. and Canada)  or Customer Assistance Offices (Mexico) .

READ NEXT:

 Exterior Lighting

SEE MORE:

 Description and Operation

TIRE PRESSURE MONITOR DESCRIPTION AND OPERATION The tire pressure monitor (TPM) system warns the driver when a significant loss or gain of tire pressure occurs in any of the 4 tires and allows the driver to display the individual tire pressures and their locations on the driver information center

 Halogen Bulbs. High Intensity Discharge (HID) Lighting. Taillamps, Turn Signal, Sidemarker, and Stoplamps

Halogen Bulbs WARNING Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package. High Intensity Discharge (HID) Lighting WARNING The low beam high intensity discharge

© 2016-2025 Copyright www.benclave.com