Buick Enclave manuals

Buick Enclave: Memory Features

On vehicles with the memory feature, the controls on the driver door are used

On vehicles with the memory feature, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and power steering column, if available.

Storing Memory Positions

To save into memory:

1. Adjust the driver seat and seatback recliner, both outside mirrors, and the power steering column, if available.

See Power Mirrors  and Steering Wheel Adjustment  for more information.

Not all vehicles will have the ability to save and recall the mirror positions.

2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.” To recall, press and release "1" or "2." The vehicle must be in P (Park).

► single beep will sound. The seat and outside mirrors will move to the position previously stored for the identified driver.

See Memory Seats  and Vehicle Personalization  for more information.

Easy Exit Posit

The easy exit feature can move the driver seat rearward and the power steering column, if available, up and forward to allow extra room to exit the vehicle.

► : Press to recall the easy exit positions. The vehicle must be in P (Park).

See Memory Seats  and Vehicle Personalization  for more information.

READ NEXT:

 Second Row Seats

  The second row seat can be folded to access the third row. Pull the sliding seat lever forward; the seat cushion folds, and the seat slides forward. See Rear Seats .

 Third Row Seats

The third row seatbacks can be folded forward, and the seats can be removed. To fold the third row seatback: 1. Remove anything on or under the seat. 2. Disconnect the rear safety belt mini-latch

 Heated and Ventilated Seats

Heated and Cooled Seat Buttons Shown, Heated Seat Buttons Similar   If available, the buttons are on the center console. To operate, the engine must be running. : If available, press to h

SEE MORE:

 Hill Start Assist (HSA)

This vehicle has a Hill Start Assist (HSA) feature, which may be useful when the vehicle is stopped on a grade. This feature is designed to prevent the vehicle from rolling, either forward or rearward, during vehicle drive off. After the driver completely stops and holds the vehicle in a compl

 Specifications, Diagnostic Information and Procedures

SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications SCHEMATIC WIRING DIAGRAMS STEERING WHEEL WIRING SCHEMATICS Heated Steering Wheel Fig. 1: NO CONTENT TILT/TELESCOPING STEERING COLUMN WIRING SCHEMATICS N38 Fig. 2: NO CONTENT DIAGNOSTIC INFORMATION AND PROCEDURES

© 2016-2021 Copyright www.benclave.com