Buick Enclave: Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
• Move the thumbwheel toward
SET/− and hold until the desired
lower speed is reached, then
release it.
• To slow down in small amounts,
move the thumbwheel toward
SET/− briefly and then release it.
Each time this is done, the
vehicle goes about 1.6 km/h
(1 mph) slower.
READ NEXT:
Use the accelerator pedal to
increase the vehicle's speed. When
you take your foot off the pedal, the
vehicle will slow down to the
previous set cruise control speed.
How well the cruise control works
on hills depends upon the vehicle's
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
accelerator pedal
SEE MORE:
TIRE PRESSURE LOW ADD AIR TO TIRE
On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low.
The low tire pressure warning light will also come on. See Tire Pressure Light
.
If a tire pressure message appears o
Windshield wiper blades should be inspected for wear
or cracking. See Scheduled Maintenance.
It is a good idea to clean or replace the wiper blade
assembly on a regular basis or when worn. For proper
windshield wiper blade length and type, see
Maintenance Replacement Parts.
To replace the
