Buick Enclave: Seat Adjustment
Seat Position
WARNING
You can lose control of the vehicle if you try to adjust a manual driver seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Adjust the driver seat only when the vehicle is not moving.
To adjust the seat position:
1. Pull the handle under the front of the seat cushion.
2. Slide the seat to the desired position and release the handle.
3. Try to move the seat back and forth to be sure it is locked in place.
Height Adjustment
Press and hold the top or bottom of the switch to raise or lower the seat.
Release the switch when the desired height is reached.
READ NEXT:
To adjust a power seat:
► Move the seat forward or rearward by sliding the control forward or rearward.
► Raise or lower the front part of the seat cushion by moving the front of the c
To adjust the lumbar support:
► Press and hold the front or rear of the control to increase or decrease lumbar support.
► Press and hold the top or bottom of the control to raise or lo
SEE MORE:
Safety Locks
Press o to activate the safety
locks on the rear doors. The
LED (A) comes on when activated.
The rear door power windows are
also disabled.
Press o again to deactivate the
lockout switch.
If the light flashes, the feature may
not be working properly.
Follow the directions closely for correct sealant usage.
When using the tire sealant and compressor kit during
cold temperatures, warm the kit in a heated environment
for 5 minutes. This will help to inflate the tire faster.
Always do a safety check first. See If a Tire Goes Flat . Do not re
