Buick Enclave manuals

Buick Enclave: Tire Pressure

Tires need the correct amount of air pressure to operate effectively.

Notice: Neither tire underinflation nor overinflation is good.

Underinflated tires, or tires that do not have enough air, can result in:

► Tire overloading and overheating which could lead to a blowout.
► Premature or irregular wear.
► Poor handling.
► Reduced fuel economy.

Overinflated tires, or tires that have too much air, can result in:

► Unusual wear.
► Poor handling.
► Rough ride.
► Needless damage from road hazards.

The Tire and Loading Information label on the vehicle indicates the original equipment tires and the correct cold tire inflation pressures.

The recommended pressure is the minimum air pressure needed to support the vehicle's maximum load carrying capacity.

For additional information regarding how much weight the vehicle can carry, and an example of the Tire and Loading Information label, see Vehicle Load Limits .

How the vehicle is loaded affects vehicle handling and ride comfort. Never load the vehicle with more weight than it was designed to carry.

When to Check

Check the tires once a month or more. Do not forget the compact spare tire, if the vehicle has one. The compact spare should be at 420 kPa (60 psi).

For additional information regarding the compact spare tire, see Compact Spare Tire .

How to Check

Use a good quality pocket-type gauge to check tire pressure.

Proper tire inflation cannot be determined by looking at the tire.

Check the tire inflation pressure when the tires are cold, meaning the vehicle has not been driven for at least three hours or no more than 1.6 km (1 mi).

Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement.

If the cold tire inflation pressure matches the recommended pressure on the Tire and Loading Information label, no further adjustment is necessary.

If the inflation pressure is low, add air until the recommended pressure is reached. If the inflation pressure is high, press on the metal stem in the center of the tire valve to release air.

Re-check the tire pressure with the tire gauge.

Return the valve caps on the valve stems to prevent leaks and keep out dirt and moisture.

READ NEXT:

 Tire Pressure Monitor System

The Tire Pressure Monitor System (TPMS) uses radio and sensor technology to check tire pressure levels. The TPMS sensors monitor the air pressure in your tires and transmit tire pressure readings

 Tire Pressure Monitor Operation

This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel ass

 Tire Inspection

We recommend that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month. Replace the tire if: ► The indicators at three

SEE MORE:

 Specifications, Diagnostic Information and Procedures

SPECIFICATIONS APPROXIMATE FLUID CAPACITIES Approximate Fluid Capacities FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications ADHESIVES, FLUIDS, LUBRICANTS AND SEALERS Adhesives, Fluids, Lubricants and Sealers COMPONENT LOCATOR TRANSFER CASE DISASSEMBLED VIEW Fig. 1: Disassemble

 Description and Operation

AIR DELIVERY DESCRIPTION AND OPERATION The air delivery description and operation is divided into 7 areas: HVAC Control Components Air Speed Auxiliary Air Speed Air Delivery Auxiliary Air Delivery Recirculation Operation Automatic Operation HVAC Control Components HVAC Control Module The HV

© 2016-2022 Copyright www.benclave.com