Buick Enclave manuals

Buick Enclave: Turn and Lane-Change Signals

Buick Regal / Buick Regal Owners Manual / Lighting / Exterior Lighting / Turn and Lane-Change Signals

Move the lever all the way up or down to signal a turn.

Move the lever all the way up or down to signal a turn.

An arrow on the instrument panel cluster flashes in the direction of the turn or lane change.

Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. If the lever is briefly pressed and released, the turn signal flashes three times.

The turn and lane-change signal can be turned off manually by moving the lever back to its original position.

If after signaling a turn or lane change, the arrow flashes rapidly or does not come on, a signal bulb might be burned out.

Have the bulbs replaced. If the bulb is not burned out, check the fuse.

See Fuses and Circuit Breakers .

READ NEXT:

 Fog Lamps

To turn on the fog lamps, the ignition and the headlamps or parking lamps must be on. If the fog lamps are turned on while the exterior lamp switch is in the AUTO position, the headlamps come on

 Interior Lighting

SEE MORE:

 Courtesy Transportation Program

To enhance your ownership experience, we and our participating dealers are proud to offer Courtesy Transportation, a customer support program for vehicles with the Bumper-to-Bumper (Base Warranty Coverage period in Canada), extended powertrain, and/or hybrid-specific warranties in both the U.S. and

 Headlamp High/Low-Beam Changer

(Headlamp High/Low-Beam Changer): Push the turn signal/ lane change lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release. This indicator light turns on in the instrument panel cluster when the high-beam

© 2016-2025 Copyright www.benclave.com