Buick Enclave: Vehicle Messages
Messages are displayed on the DIC to notify the driver that the status of the
vehicle has changed and that some action may be needed by the driver to correct
the condition.
Multiple messages may appear one after another.
Some messages may not require immediate action, but you can press any of the
DIC buttons on the instrument panel to acknowledge that you received the messages
and to clear them from the display.
Some messages cannot be cleared from the DIC display because they are more urgent.
These messages require action before they can be cleared. You should take any messages
that appear on the display seriously and remember that clearing the messages will
only make the messages disappear, not correct the problem.
The following are the possible messages that can be displayed and some information
about them.
READ NEXT:
BATTERY SAVER ACTIVE
This message displays when the system detects that the battery voltage is dropping
below expected levels. The battery saver system starts reducing certain features
of the veh
SERVICE BRAKE SYSTEM
This message displays along with the brake system warning light if there is a
problem with the brake system. See Brake System Warning Light . If this message
appears, stop as
SEE MORE:
If there are no currently recognized
transmitters available, follow this
procedure to program up to five
transmitters. This feature is not
available in Canada. This procedure
will take approximately 30 minutes
to complete. The vehicle must be off
and all of the transmitters you wish
To set the parking brake, hold the regular brake
pedal down with your foot and pull up on the
parking brake lever located between the seats.
If the ignition is on, the brake system warning light
on the instrument panel cluster will come on.
To release the parking brake, hold the regular
br
