Buick Enclave manuals

Buick Enclave: Engine Coolant

Buick Rainier / Buick Rainier Owners Manual / Service and Appearance Care / Checking Things Underthe Hood / Engine Coolant

The cooling system in your vehicle is filled with DEX-COOL® engine coolant. This coolant is designed to remain in your vehicle for five years or 150,000 miles (240 000 km), whichever occurs first, if you add only DEX-COOL® extended life coolant.

The following explains your cooling system and how to add coolant when it is low. If you have a problem with engine overheating, see Engine Overheating on page 382.

A 50/50 mixture of clean, drinkable water and DEX-COOL® coolant will:

• Give freezing protection down to −34°F (−37°C).
• Give boiling protection up to 265°F (129°C).
• Protect against rust and corrosion.
• Help keep the proper engine temperature.
• Let the warning lights and gages work as they should.

Notice: Using coolant other than DEX-COOL® may cause premature engine, heater core, or radiator corrosion. In addition, the engine coolant may require changing sooner, at the first maintenance service after each 30,000 miles (50 000 km) or 24 months, whichever occurs first. Any repairs would not be covered by your warranty. Always use DEX-COOL® (silicate-free) coolant in your vehicle.

READ NEXT:

 What to Use

Use a mixture of one-half clean, drinkable water and one-half DEX-COOL® coolant. If you use this coolant mixture, you do not need to add anything else. CAUTION: Adding only plain water to your

 Checking Coolant

The engine coolant recovery tank is in the engine compartment on the passenger’s side of the vehicle. The cap has this symbol on it. The vehicle must be on a level surface. When your engine

SEE MORE:

 Exit Lighting

The headlamps, taillamps, parking lamps, back-up lamps, and license plate lamps come on at night, or in areas with limited lighting, when the key is removed from the ignition. The dome lamps also come on when the key is removed from the ignition. The exterior lamps and dome lamps remain on after th

 Instrument Panel Fuse Block

The instrument panel fuse block is on the driver side of the instrument panel. To access the fuses: 1. Access the fuse block by opening the storage compartment. 2. Pull straight down and out to remove the storage compartment. 3. Remove the cover. To reinstall the cover, line up the retainers

© 2016-2025 Copyright www.benclave.com