Buick Enclave: Memory Seats
Memory Seats
On vehicles with the memory
feature, the “1” and “2” buttons on
the outboard side of the driver seat
are used to manually save and
recall the driver seat and outside
mirror positions. These manually
stored positions are referred to as
Button Memory positions.
The vehicle will also automatically
save driver seat and outside mirror
positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
placed in OFF. These automatically
stored positions are referred to as
RKE Memory positions. See
Remote Keyless Entry (RKE)
System Operation for
more information.
READ NEXT:
To save positions into Button
Memory:
1. Adjust the driver seat, seatback
recliner, and both outside mirrors
to the desired driving positions.
2. Press and hold MEM (Memory)
and “1” at t
To recall the manually saved Button
Memory positions, press and hold
“1” or “2.” The driver seat and
outside mirrors move to the
positions stored to those buttons
when pressed. Relea
SEE MORE:
a) Check all fuel and vapor lines and hoses for proper hook-up, routing, and
condition. Check that the purge valve, if the vehicle has one, works properly. Replace
as needed.
b) Or every four years, whichever comes first.
c) Or every five years, whichever comes first. See Cooling System .
d)
Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.
WARNING
. Poorly maintained and improperly used tires are dan
