Buick Enclave: Hydraulic Brakes
READ NEXT:
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
BRAKE SYSTEM SPECIFICATIONS
Brake System Specifications
SCHEMATIC WIRING DIAGRAMS
HYDRAULIC BRAKE WIRING SCHEMATI
MASTER CYLINDER RESERVOIR FILLING
WARNING: Refer to Brake Fluid Irritant Warning.
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components
Caution.
1. Visually inspect the brake flui
SEE MORE:
REAR DRIVE AXLE DESCRIPTION AND OPERATION
Fig. 51: View Of Rear Drive Axle Assembly
The rear drive axle assembly in this vehicle consists of an aluminum housing
which contains an electric clutch
which is located in the driveline torque tube (for vehicles equipped with all
wheel drive AWD only) an
License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license plate lamps to the liftgate
trim.
2. Turn and pull the license plate lamp forward through the liftgate trim opening.
3. Turn the bulb socket counterclockwise and pull the bulb straight out o
Specifications, Diagnostic Information and Procedures
