Buick Enclave: Inserting a Disc
To play a disc, gently insert the disc, with the label side up, into the loading
slot. The DVD player might not accept some paper labeled media. The player starts
loading the disc into the system and shows “Loading Disc” on the radio display.
At the same time, the radio displays a softkey menu of option(s). Some discs
automatically play the movie while others default to the softkey menu display, which
requires the Play, Enter, or Navigation softkeys to be pressed; either by the softkey
on the radio or by the rear seat passenger using the remote control.
It may take up to 30 seconds for a DVD to begin playing.
READ NEXT:
To stop playing a DVD without turning off the system, do one of the following:
► Press on the remote control.
► Press the softkey under the stop or the play/pause icons displayed on t
Press DVD on the radio to eject
the disc. If a disc is ejected from the radio, but not removed, the radio reloads
the disc after a short period of time. The disc is stored in the radio. The radio
Player Error: This message displays when there are disc load or eject problems.
Disc Format Error: This message displays if the disc is inserted with the disc
label wrong side up, or if the disc is
SEE MORE:
COOLING SYSTEM DRAINING AND FILLING (STATIC FILL)
Draining Procedure
Special Tools
J 26568 Coolant and Battery Tester
WARNING: To avoid being burned, do not remove the radiator cap or surge
tank cap
while the engine is hot. The cooling system will release scalding fluid and
steam under pressure
CAMBER DESCRIPTION
Fig. 5: Illustrating Camber Angle
Camber is the tilting of the wheels from the vertical when viewed from the
front of the vehicle. When the
wheels tilt outward at the top, the camber is positive (+). When the wheel tilts
inward at the top, the camber is
negative (-). The amount
© 2016-2024 Copyright www.benclave.com