Buick Enclave: License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license plate lamps to the liftgate trim.
2. Turn and pull the license plate lamp forward through the liftgate trim opening.
3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license plate lamp.
READ NEXT:
Replacement Bulbs
For replacement bulbs not listed here, contact your dealer.
High Voltage Devices and Wiring
WARNING
Exposure to high voltage can cause shock, burns, and even death. The high voltage
components in the vehicle can only be serviced by technicians with special training.
High voltage componen
SEE MORE:
Repair Instructions
INTERMEDIATE STEERING SHAFT BOOT REPLACEMENT
Removal Procedure
1. Turn the steering wheel to the straight forward position and lock the
steering column.
CAUTION: With wheels of the vehicle facing straight ahead, secure the
steering
wheel utilizing steering column anti-rotation pin, steering column
Specifications, Diagnostic Information and Procedures
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
ADHESIVES, FLUIDS, LUBRICANTS AND SEALERS
Adhesives, Fluids, Lubricants and Sealers
DIAGNOSTIC INFORMATION AND PROCEDURES
TIRE DIAGNOSIS - IRREGULAR OR PREMATURE WEAR
Tire Wear
Fig. 1: Identifying Types Of Tire W
© 2016-2024 Copyright www.benclave.com
