Buick Enclave: Park Brake and P (Park) Mechanism Check
WARNING!
When you are doing this check,
the vehicle could begin to move.
You or others could be injured
and property could be damaged.
Make sure there is room in front
of the vehicle in case it begins to
roll. Be ready to apply the regular
brake at once should the vehicle
begin to move.
Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake, set
the parking brake.
• To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.
• To check the P (Park)
mechanism's holding ability:
With the engine running, shift to
P (Park). Then release the
parking brake followed by the
regular brake.
Contact your dealer if service is
required.
READ NEXT:
Windshield wiper blades should be
inspected for wear and cracking.
See Maintenance Schedule for more information.
Replacement blades come in
different types and are removed in
different ways.
The headlamp aiming system has
been preset at the factory.
If the vehicle is damaged in an
accident, the aim of the headlamps
may be affected and adjustment
may be necessary.
It is recommend
SEE MORE:
Some state/provincial and local governments have or
might begin programs to inspect the emission control
equipment on the vehicle. Failure to pass this inspection
could prevent getting a vehicle registration.
Here are some things to know to help the vehicle pass
an inspection:
• The vehi
The auxiliary input jack is located on the lower right side of the faceplate.
This is not an audio output; do not plug a headphone set into the front auxiliary
input jack. Connect an auxiliary input device such as an iPod, laptop computer,
MP3 player, CD player, or cassette tape player to the a
