Buick Enclave: Power Steering
READ NEXT:
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
POWER STEERING PUMP SPECIFICATIONS
Power Steering Pump Specifications
SCHEMATIC WIRING DIAGRAMS
POWER STEERING WI
STEERING LINKAGE INNER TIE ROD INSPECTION
Special Tools
GE-8001 Dial Indicator Set
For equivalent regional tools, refer to Special Tools.
1. Turn the ignition key to the ON position with the engine
SEE MORE:
TRANSFER CASE FLUID REPLACEMENT
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the drain plug.
Fig. 2: Identifying Drain Plug
3. Remove the fill plug.
Fig. 3: Identifying Fill Plug
Installation Procedure
1. Clean the drain plug.
Fig. 4: Id
New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform
better in the long run if you follow these guidelines:
► If you have all-wheel drive, keep your speed at 88 km/h (55 mph) or less for the
first 805 km (500 mi).
► Do not drive at any o
Specifications, Diagnostic Information and Procedures
