Buick Enclave: Remote Vehicle Start
Starting the Vehicle
With this feature the engine can be started from outside of the vehicle.
1. Aim the RKE transmitter at the vehicle.
2. Press and release 
3. Immediately after completing Step 2, press and hold
until the parking lamps flash.
When the vehicle starts, the parking lamps will turn on and remain on as long
as the engine is running.
The doors will be locked and the climate control system may come on.
The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute
time extension. Remote start can be extended only once.
Canceling a Remote Start
To cancel a remote start:
► Aim the RKE transmitter at the vehicle
and press and hold until the parking
lamps turn off.
► Turn on the hazard warning flashers.
► Turn the ignition switch on and then off.
See Remote Vehicle Start .
READ NEXT:
To lock or unlock a door manually:
► From the inside, use the door lock knob on the window sill.
► From the outside, turn the key toward the front or rear of the vehicle, or press
the
To open the liftgate the vehicle must be in P (Park). Press the touch pad under
the liftgate handle. To close the liftgate, use the pull cup or pull strap as an
aid.
Power Liftgate
On vehicles w
Press the switch to lower the window. Pull the switch up to raise it.
For more information, see Power Windows .
SEE MORE:
AIR DELIVERY DESCRIPTION AND OPERATION
The air delivery description and operation is divided into 4 areas:
HVAC Control Components
Air Speed
Air Delivery
Recirculation Operation
HVAC Control Components
HVAC Control Module
The HVAC control module is a GMLAN device that interfaces between the
o
All seating positions in the vehicle have a lap-shoulder belt.
If you are using a rear seating position with a detachable safety belt and the
safety belt is not attached, see “Returning the Seat to the Seating Position” under
Third Row Seats for instruction on reconnecting the safety
© 2016-2020 Copyright www.benclave.com
