Buick Enclave manuals

Buick Enclave: Engine Oil Pressure Light. Security Light. High-Beam On Light

Buick Enclave 2008-2017 Owners Manual / Instruments and Controls / Warning Lights, Gauges, and Indicators / Engine Oil Pressure Light. Security Light. High-Beam On Light

Engine Oil Pressure Light

Do not keep driving if the oil pressure is low. The engine can become so hotWARNING
Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire.

Someone could be burned. Check the oil as soon as possible and have the vehicle serviced.

Notice: Lack of proper engine oil maintenance can damage the engine. The repairs would not be covered by the vehicle warranty.

Always follow the maintenance schedule for changing engine oil.

The oil pressure light should come on briefly as the engine is started.

The oil pressure light should come on briefly as the engine is started.

If it does not come on have the vehicle serviced by your dealer.

If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem.

Security Light

The security light should come on briefly as the engine is started.

The security light should come on briefly as the engine is started.

If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your dealer.

If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system.

This light is also used to indicate the status of the anti-theft alarm system when the ignition is turned off.

The light will flash rapidly if the alarm system is arming and one or more of the monitored entry points is not closed. The light will stay on if the alarm is arming and all entry points are closed.

For information regarding this light and the vehicle's security system, see Anti-theft Alarm System .

High-Beam On Light

The high-beam on light comes on when the high-beam headlamps are in use.

The high-beam on light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer  for more information.

READ NEXT:

 Front Fog Lamp Light. Cruise Control Light

Front Fog Lamp Light The fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps  for more information. Cruise Control Ligh

 Information Displays

SEE MORE:

 Head Restraints

The vehicle's front seats have adjustable head restraints in the outboard seating positions. WARNING With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restrai

 License Plate Lamp. Replacement Bulbs

License Plate Lamp To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the liftgate trim. 2. Turn and pull the license plate lamp forward through the liftgate trim opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out o

© 2016-2026 Copyright www.benclave.com