Buick Enclave: Tire Rotation and Required Services Every 12 000 km/7,500 mi
Rotate the tires, if recommended for the vehicle, and perform the following services.
See Tire Rotation .
- Check engine oil level and oil life percentage. If needed, change engine
oil and filter, and reset oil life system. See Engine Oil and Engine Oil
Life System .
- Check engine coolant level. See Engine Coolant .
- Check windshield washer fluid level. See Washer Fluid .
- Visually inspect windshield wiper blades for wear, cracking, or contamination
and replace worn or damaged blades. See Exterior Care . Replace wiper blades
every 20 000 km/12,000 mi or 12 months. See Wiper Blade Replacement .
- Check tire inflation pressures. See Tire Pressure .
- Inspect tire wear. See Tire Inspection .
- Visually check for fluid leaks.
- Inspect engine air cleaner filter. See Engine Air Cleaner/Filter .
- Inspect brake system.
- Visually inspect steering, suspension, and chassis components for damaged,
loose, or missing parts or signs of wear. See Exterior Care .
- Check restraint system components. See Safety System Check .
- Visually inspect fuel system for damage or leaks.
- Visually inspect exhaust system and nearby heat shields for loose or damaged
parts.
- Lubricate body components. See Exterior Care .
- Check starter switch. See Starter Switch Check .
- Check automatic transmission shift lock control function. See Automatic
Transmission Shift Lock Control Function Check .
- Check ignition transmission lock. See Ignition Transmission Lock Check .
- Check parking brake and automatic transmission park mechanism. See Park
Brake and P (Park) Mechanism Check .
- Check accelerator pedal for damage, high effort, or binding. Replace if
needed.
- Visually inspect gas strut for signs of wear, cracks, or other damage. Check
the hold open ability of the strut. See your dealer if service is required.
- Inspect sunroof track and seal, if equipped. See Sunroof .

READ NEXT:
a) Check all fuel and vapor lines and hoses for proper hook-up, routing, and
condition. Check that the purge valve, if the vehicle has one, works properly. Replace
as needed.
b) Or every four yea
a) Check all fuel and vapor lines and hoses for proper hook-up, routing, and
condition. Check that the purge valve, if the vehicle has one, works properly. Replace
as needed.
b) Or every four yea
SEE MORE:
There are a few ways to store
presets.
Up to 36 preset stations can be
stored. AM, FM, and XM,
if equipped, can be mixed.
1. From the AM, FM, or XM main
page, press and hold one of the
preset screen buttons located at
the bottom of the screen. After a
few seconds, a beep will be
he
Each TPMS sensor has a unique
identification code. The identification
code needs to be matched to a new
tire/wheel position after rotating the
vehicle’s tires or replacing one or
more of the TPMS sensors. The
TPMS sensor matching process
should also be performed after
replacing a s