Buick Enclave: Turn and Lane-Change Signals

An arrow on the instrument panel cluster will flash in the direction of the turn
or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow starts to flash to signal a lane change.
The turn signal flashes three times.
The lever returns to its starting position when it is released.
If after signaling a turn or lane change the arrow flashes rapidly or does not
come on, a signal bulb may be burned out. Have the bulbs replaced. If the bulb is
not burned out, check the fuse. See Fuses and Circuit Breakers for more information.
READ NEXT:
For vehicles with front fog lamps, the button is located on the outboard side
of the instrument panel.
The ignition must be on to turn on the fog lamps.
(Front Fog Lamps): Press to turn
the f
SEE MORE:
Air Vents
Use the louvers located on the air vents to change the direction of the airflow.
Use the thumbwheels near the air vents to control the amount of airflow or to
shut off the airflow.
Operation Tips
Keep all outlets open whenever possible for best system performance.
Keep the paths
Safety belts work for everyone, including pregnant
women. Like all occupants, they are more likely
to be seriously injured if they do not wear
safety belts.
A pregnant woman should wear a lap-shoulder
belt, and the lap portion should be worn as low
as possible, below the rounding, throughout