Buick Enclave: Clock
To adjust the time and date:
1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press
to turn the radio on.
2. Press to display HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year).
3. Press the pushbutton located under any one of the labels to be changed.
4. To increase the time or date, do one of the following:
► Press the pushbutton below the selected label.
► Press
SEEK.
► Press
FWD.
► Turn
clockwise.
5. To decrease the time or date, do one of the following:
► Press
SEEK.
► Press
REV.
► Turn
counterclockwise.
To change the time default setting from 12 hour to 24 hour or to change the date
default setting from month/day/year to day/month/year:
1. Press and then the pushbutton
located under the forward arrow that displays on the radio screen until the time
12H (hour) and 24H (hour), and the date MM/DD (month and day) and DD/MM (day and
month) display.
2. Press the pushbutton located under the desired option.
3. Press again to apply the selected
default, or let the screen time out.
READ NEXT:
The vehicle has 12-volt outlets that can be used to plug in electrical equipment,
such as a cell phone or MP3 player.
The power outlets are located on the instrument panel below the climate control
Warning lights and gauges can signal that something is wrong before it becomes
serious enough to cause an expensive repair or replacement. Paying attention to
the warning lights and gauges could p
English Shown, Metric Similar
SEE MORE:
Player Error: This message displays when there are disc load or eject problems.
Disc Format Error: This message displays if the disc is inserted with the disc
label wrong side up, or if the disc is damaged.
Disc Region Error: This message displays if the disc is not from a correct region.
No Di
* PLEASE READ THIS FIRST *
NOTE: Examples used in this article are general in nature and do not
necessarily relate
to a specific engine or system. Illustrations and procedures have been chosen
to guide mechanic through engine overhaul process. Descriptions of processes
of cleaning, inspection, asse
© 2016-2024 Copyright www.benclave.com