Buick Enclave: Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system
overload.
When the current electrical load is too heavy, the circuit breaker opens and
closes, protecting the circuit until the current load returns to normal or the problem
is fixed. This greatly reduces the chance of circuit overload and fire caused by
electrical problems.
Fuses and circuit breakers protect power devices in the vehicle.
Replace a bad fuse with a new one of the identical size and rating.
If there is a problem on the road and a fuse needs to be replaced, the same amperage
fuse can be borrowed. Choose some feature of the vehicle that is not needed to use
and replace it as soon as possible.
READ NEXT:
An electrical overload may cause the lamps to go on and off, or in some cases
to remain off. Have the headlamp wiring checked right away if the lamps go on and
off or remain off.
If the wiper motor overheats due to heavy snow or ice, the windshield wipers
will stop until the motor cools, and the wiper control is turned off. After removal
of the blockage, the wiper motor wi
SEE MORE:
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press .
2. Say “Three-way call.”.
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press to li
1. Press
.
► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.
► For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds “Ready,” followed by a tone.
2. Say “B