Buick Enclave manuals

Buick Enclave: High Intensity Discharge (HID) Lighting

Buick Enclave 2008-2017 Owners Manual / Vehicle Care / Bulb Replacement / High Intensity Discharge (HID) Lighting

The low beam high intensity discharge lighting system operates at a very highWARNING
The low beam high intensity discharge lighting system operates at a very high voltage.

If you try to service any of the system components, you could be seriously injured. Have your dealer or a qualified technician service them.

After an HID headlamp bulb has been replaced, the beam might be a slightly different shade than it was originally. This is normal.

READ NEXT:

 Taillamps, Turn Signal, Sidemarker, and Stoplamps

A. Taillamp B. Sidemarker Lamp To replace one of these bulbs: 1. Open the liftgate. See Liftgate . 2. Remove the black cuff from the lamp assembly by pulling rearward from the top to unfasten

 License Plate Lamp

To replace one of these bulbs: 1. Remove the two screws holding each of the license plate lamps to the liftgate trim. 2. Turn and pull the license plate lamp forward through the liftgate trim op

 Replacement Bulbs

For replacement bulbs not listed here, contact your dealer.

SEE MORE:

 Airbag System Check

The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working. See Airbag Readiness Light  for more information. Notice: If an airbag covering is damaged, opened, or broken, the airbag may not work properly. Do not open or

 Customer Assistance Offices (Mexico)

To contact the Customer Assistance Center (CAC), use the phone numbers listed in this section. Customer assistance is available Monday through Friday, 08:00 to 20:00 hours, and Saturdays from 08:00 to 15:00 hours. All e-mail inquiries to the Customer Assistance Center (CAC) should be sent to:

© 2016-2021 Copyright www.benclave.com