Buick Enclave: Shifting Into Park
WARNING
It can be dangerous to get out of the vehicle if the shift lever is not fully
in P (Park) with the parking brake firmly set. The vehicle can roll. If you have
left the engine running, the vehicle can move suddenly. You or others could be injured.
To be sure the vehicle will not move, even when you are on fairly level ground,
use the steps that follow. If you are pulling a trailer, see Driving Characteristics
and Towing Tips .
Use this procedure to shift into P (Park):
1. Hold the brake pedal down and set the parking brake. See Parking Brake
for more information.
2. Hold the button on the shift lever and push the lever toward the front of
the vehicle into P (Park).
3. Turn the ignition to LOCK/OFF.
4. Remove the key.
READ NEXT:
WARNING
It can be dangerous to leave the vehicle with the engine running. The vehicle
could move suddenly if the shift lever is not fully in P (Park) with the parking
brake firmly set. And, if
Torque lock is when the weight of the vehicle puts too much force on the parking
pawl in the transmission. This happens when parking on a hill and shifting the transmission
into P (Park) is not do
SEE MORE:
Windshield wiper blades should be inspected for wear and cracking. See Maintenance
Schedule for more information.
Replacement blades come in different types and are removed in different ways.
For proper type and length, see Maintenance Replacement Parts .
Notice: Allowing the wiper arm t
GM has developed and matched specific tires for the vehicle. The original equipment
tires installed were designed to meet General Motors Tire Performance Criteria Specification
(TPC Spec) system rating. When replacement tires are needed, GM strongly recommends
buying tires with the same TPC Sp