Buick Enclave: Windshield Wiper/Washer
The windshield wiper lever is on the right side of the steering column. With
the ignition in ACC/ ACCESSORY or ON/RUN, move the windshield wiper lever to select
the wiper speed.
2: Use for fast wipes.
1: Use for slow wipes.
(Adjustable Interval Wipes): Move
the lever to 
, then turn the
band up for more frequent wipes or down for less frequent wipes.
(Off): Use to turn the windshield wipers
off. 
(Mist): Briefly move the wiper
lever down for a single wipe or hold down for several wipes. Clear ice and snow
from the wiper blades before using them. If they are frozen to the windshield, carefully
loosen or thaw them. Damaged wiper blades should be replaced. See Wiper Blade Replacement
. Heavy snow or ice can overload the wipers. A circuit breaker stops them until
the motor cools.
READ NEXT:
If the ignition is turned to LOCK/ OFF while the wipers are on 1, 2, or
, they will immediately stop.
If the windshield wiper lever is then moved to
before the driver door is opened, or
within 1
Pull the windshield wiper lever toward you to spray windshield washer fluid and
activate the wipers.
The washer and wipers will continue until the lever is released or the maximum
wash time is re
SEE MORE:
AUDIO: Push and release the AUDIO knob until
BASS, MID (midrange) (without Bose®), or TREB
(treble) displays. Turn the knob to increase or to
decrease the tone. The display shows the bass,
midrange (without Bose®), or treble level. If a
station is weak or has static, decrease the treble.
T
These buttons have factory PTY presets. Up to
12 PTYs (six FM1 and six FM2), can be
programmed on the six numbered pushbuttons, by
performing the following steps:
1. Press BAND to select FM1 or FM2.
2. Press the TYPE button to activate program
type select mode. TYPE and the last selected
PT
