Buick Enclave manuals

Buick Enclave: Windshield Wiper/Washer

Buick Verano / Buick Verano Owners Manual / Instruments and Controls / Controls / Windshield Wiper/Washer

The windshield wiper lever is on the right side of the steering column. With

The windshield wiper lever is on the right side of the steering column. With the ignition in ACC/ ACCESSORY or ON/RUN, move the windshield wiper lever to select the wiper speed.

2: Use for fast wipes.

1: Use for slow wipes.

(Adjustable Interval Wipes): Move

the lever to , then turn the(Adjustable Interval Wipes): Move the lever to band up for more frequent wipes or down for less frequent wipes., then turn the band up for more frequent wipes or down for less frequent wipes. off. (Mist): Briefly move the wiper (Off): Use to turn the windshield wipers off. lever down for a single wipe or hold down for several wipes. Clear ice and snow(Mist): Briefly move the wiper lever down for a single wipe or hold down for several wipes. Clear ice and snow from the wiper blades before using them. If they are frozen to the windshield, carefully loosen or thaw them. Damaged wiper blades should be replaced. See Wiper Blade Replacement . Heavy snow or ice can overload the wipers. A circuit breaker stops them until the motor cools.

READ NEXT:

 Wipe Parking

If the ignition is turned to LOCK/ OFF while the wipers are on 1, 2, or , they will immediately stop. If the windshield wiper lever is then moved to before the driver door is opened, or within 1

 Windshield Washer

Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The washer and wipers will continue until the lever is released or the maximum wash time is re

SEE MORE:

 Electric Power Management

This vehicle has Electric Power Management (EPM), an advanced control system. It estimates the battery’s temperature and state of charge and then adjusts the voltage for best performance and extended life of the battery. When the battery’s state of charge is low, the voltage is raised sl

 Removing the Flat Tire and Installing the Spare Tire

1. Do a safety check before proceeding. See Changing a Flat Tire. 2. Turn the wheel wrench counterclockwise to loosen all the wheel nuts, but do no remove them yet. 3. Turn the jack handle counterclockwise to lower the jack lift head until it fits under the vehicle. Turn the jack handle c

© 2016-2025 Copyright www.benclave.com