Buick Enclave manuals

Buick Enclave: Starting the Engine

Buick LaCrosse / Buick LaCrosse Owners Manual / Driving and Operating / Starting and Operating / Starting the Engine

Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only.

Notice:
Do not try to shift to P (Park) if the vehicle is moving.
If you do, you could damage the transmission. Shift to P (Park) only when the vehicle is stopped.

Notice:
The engine is designed to work with the electronics in the vehicle. If you add electrical parts or accessories, you could change the way the engine operates.
Before adding electrical equipment, check with your dealer. If you do not, the engine might not perform properly. Any resulting damage would not be covered by the vehicle warranty.

READ NEXT:

 Starting Procedure (Key Access)

1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the ignition. The idle speed will go down as your engine gets warm. Do not rac

 Starting Procedure (Keyless Access)

1. If the vehicle has the keyless access system, the transmitter must be in the vehicle. Put your foot on the brake pedal and push the START button. When the engine begins cranking, let go

SEE MORE:

 Online Owner Center

Manage your vehicle (U.S.) at buick.com. Click on "Owners," then "Manage My Buick/Owners Login." Information and services customized for your specific vehicle — all in one convenient place. • Digital owner manual, warranty information, and more. • Storage for

 Voice Recognition

The voice recognition system uses commands to control the system and dial phone numbers. Noise: The system may not recognize voice commands if there is too much background noise. When to Speak: A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then

© 2016-2025 Copyright www.benclave.com