Buick Enclave manuals

Buick Enclave: Starting the Engine

Buick LaCrosse / Buick LaCrosse Owners Manual / Driving and Operating / Starting and Operating / Starting the Engine

Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only.

Notice:
Do not try to shift to P (Park) if the vehicle is moving.
If you do, you could damage the transmission. Shift to P (Park) only when the vehicle is stopped.

Notice:
The engine is designed to work with the electronics in the vehicle. If you add electrical parts or accessories, you could change the way the engine operates.
Before adding electrical equipment, check with your dealer. If you do not, the engine might not perform properly. Any resulting damage would not be covered by the vehicle warranty.

READ NEXT:

 Starting Procedure (Key Access)

1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the ignition. The idle speed will go down as your engine gets warm. Do not rac

 Starting Procedure (Keyless Access)

1. If the vehicle has the keyless access system, the transmitter must be in the vehicle. Put your foot on the brake pedal and push the START button. When the engine begins cranking, let go

SEE MORE:

 High Intensity Discharge (HID) Lighting

WARNING The low beam high intensity discharge lighting system operates at a very high voltage. If you try to service any of the system components, you could be seriously injured. Have your dealer or a qualified technician service them. After an HID headlamp bulb has been replaced, the beam mi

 Remote Vehicle Start

Starting the Vehicle With this feature the engine can be started from outside of the vehicle. 1. Aim the RKE transmitter at the vehicle. 2. Press and release 3. Immediately after completing Step 2, press and hold until the parking lamps flash. When the vehicle starts, the parking lamps will

© 2016-2025 Copyright www.benclave.com