Buick Enclave manuals

Buick Enclave: Starting the Engine

Buick LaCrosse / Buick LaCrosse Owners Manual / Driving and Operating / Starting and Operating / Starting the Engine

Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only.

Notice:
Do not try to shift to P (Park) if the vehicle is moving.
If you do, you could damage the transmission. Shift to P (Park) only when the vehicle is stopped.

Notice:
The engine is designed to work with the electronics in the vehicle. If you add electrical parts or accessories, you could change the way the engine operates.
Before adding electrical equipment, check with your dealer. If you do not, the engine might not perform properly. Any resulting damage would not be covered by the vehicle warranty.

READ NEXT:

 Starting Procedure (Key Access)

1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the ignition. The idle speed will go down as your engine gets warm. Do not rac

 Starting Procedure (Keyless Access)

1. If the vehicle has the keyless access system, the transmitter must be in the vehicle. Put your foot on the brake pedal and push the START button. When the engine begins cranking, let go

SEE MORE:

 Park Tilt Mirrors

If the vehicle has the memory package, the outside mirrors have a park tilt feature. This feature tilts the outside mirrors to a preselected position when the vehicle is in R (Reverse). This allows the driver to view the curb for parallel parking. The passenger and/or driver mirror returns to i

 Transferring a Call

Audio can be transferred between the Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN. To Transfer Audi

© 2016-2025 Copyright www.benclave.com