Buick Enclave manuals

Buick Enclave: Starting the Engine

Buick LaCrosse / Buick LaCrosse Owners Manual / Driving and Operating / Starting and Operating / Starting the Engine

Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only.

Notice:
Do not try to shift to P (Park) if the vehicle is moving.
If you do, you could damage the transmission. Shift to P (Park) only when the vehicle is stopped.

Notice:
The engine is designed to work with the electronics in the vehicle. If you add electrical parts or accessories, you could change the way the engine operates.
Before adding electrical equipment, check with your dealer. If you do not, the engine might not perform properly. Any resulting damage would not be covered by the vehicle warranty.

READ NEXT:

 Starting Procedure (Key Access)

1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the ignition. The idle speed will go down as your engine gets warm. Do not rac

 Starting Procedure (Keyless Access)

1. If the vehicle has the keyless access system, the transmitter must be in the vehicle. Put your foot on the brake pedal and push the START button. When the engine begins cranking, let go

SEE MORE:

 When the System Does Not Seem to Work Properly

The following messages may be displayed on the DIC: SERVICE PARK ASSIST: If this message occurs, take the vehicle to your dealer to repair the system. PARK ASSIST OFF: If the URPA system does not activate due to a temporary condition, this message displays on the DIC. This can occur

 Door Unlock Options

This allows selection of which doors will unlock when pressing on the RKE transmitter. Press SELECT when Door Unlock Options is highlighted. Turn the Menu knob to select All Doors or Driver Door Only. When set to Driver Door Only, the driver door will unlock the first time the unlock

© 2016-2025 Copyright www.benclave.com