Buick Enclave: Transfer Case - Getrag 790
READ NEXT:
SPECIFICATIONS
APPROXIMATE FLUID CAPACITIES
Approximate Fluid Capacities
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
ADHESIVES, FLUIDS, LUBRICANTS AND SEALERS
Adhesives, Fl
TRANSFER CASE FLUID REPLACEMENT
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the drain plug.
Fig. 2: Identifying Drain Plug
3. Remove the f
TRANSFER CASE DISASSEMBLE
Housing O-ring, Vent Assembly, Drain and Fill Plug Removal
Fig. 27: View Of Transfer Case Housing O-Ring, Vent Assembly, Drain & Fill
Plugs
Housing O-Ring, Vent Assembl
SEE MORE:
Use of the recommended fuel is an important part of the proper maintenance of
this vehicle. To help keep the engine clean and maintain optimum vehicle performance,
we recommend the use of gasoline advertised as TOP TIER Detergent Gasoline.
Look for the TOP TIER label on the fuel pump to ensure
The tire sealant and compressor kit is located in the storage compartment on
the driver side, at the rear of the vehicle.
1. Press down on the latch tab and pull the cover off to access the storage compartment.
2. Press the two tabs on the quick release buckle to release the tire sealant and
© 2016-2022 Copyright www.benclave.com
